|
Product Details:
Payment & Shipping Terms:
|
Product Name: | Heat Shrink Tube | Material: | PE Material |
---|---|---|---|
Type: | Heat Shrinkable | Application: | Low Voltage |
Colour: | Colourful | Tensile Strength: | 10.4Mpa |
High Light: | heat shrink plastic tubing,heat shrink wrap tubing |
Different sizes Heat shrink insulation sleeving, heat shrink tubing for wires and electrical wires
1. Product Introduction
different sizes Heat shrink insulation sleeving, heat shrink tubing for wires and electrical wires
The product has flat tube and round tube .
Applications: electronics, communications, automotive, shipping, aircraft manufacturing and other industries
Specially designed formula approved by UL . Flexible and flame retardant. Offering low Shrinking temperature .
This thin wall heat shrink tubing is widely used to the cable and wire insulation and protection that need good fire resistance .
2:1 Shrink Ratio
Maximum Continuous use temperature 125°C
Shrink Temperature of 80°C and operating temperature of -55°C to + 125°C
Function : 1 . Wire coat and insulation .
2 . make the joint of terminal block .
3 . divide the colors .
4 . water-proof .
5 . protection and insulation of insistors and electrical capacitors .
2. Technical Parameter
Property | Test Method | Result |
Tensile Strength | ASTM D638 | 12 N/mm2 |
Elongation | ASTM D638 | 300% |
Heat Shock@250℃/30’ | ASTM D2671 | No Cracking .No Flow |
Cold Blend@-30℃ | ASTM D2671 | No Cracking |
Dielectric Strength | ASTM D149 | 15kv/mm |
Voltage Withstand | @2.5kv for 60 sec | No breakdown |
Volume Resistivity | ASTM D257 | 1x1014Ω.cm |
Longitudinal Change | ASTM D2671 | Inside +/- 5% |
3. Specification Packing
2:1 Ratio
Size | Before Applied (mm) | After Applied (mm) | Package | ||
(mm) | Internal Diameter |
Wall Thickness |
Internal Diameter |
Wall Thickness |
(M/Spool) |
Ø3.0/1.5 | 3.5±0.2 | 0.18±0.05 | ≤1.5 | 0.35±0.05 | 200 |
Ø3.5/1.75 | 4.0±0.2 | 0.18±0.05 | ≤1.75 | 0.40±0.05 | 200 |
Ø4.0/2.0 | 4.5±0.2 | 0.20±0.05 | ≤2.0 | 0.40±0.05 | 100 |
Ø5.0/2.5 | 5.5±0.3 | 0.20±0.08 | ≤2.5 | 0.40±0.08 | 100 |
Ø6.0/3.0 | 6.5±0.3 | 0.20±0.08 | ≤3.0 | 0.40±0.08 | 100 |
Ø7.0/3.5 | 7.5±0.3 | 0.20±0.08 | ≤3.5 | 0.42±0.08 | 100 |
Ø8.0/4.0 | 8.5±0.3 | 0.20±0.08 | ≤4.0 | 0.42±0.08 | 100 |
Ø9.0/4.5 | 9.6±0.3 | 0.22±0.08 | ≤4.5 | 0.45±0.08 | 100 |
Ø10.0/5.0 | 10.6±0.4 | 0.22±0.08 | ≤5.0 | 0.45±0.08 | 100 |
Ø11.0/5.5 | 11.6±0.4 | 0.22±0.10 | ≤5.5 | 0.45±0.10 | 100 |
Ø12.0/6.0 | 12.6±0.4 | 0.22±0.10 | ≤6.0 | 0.45±0.10 | 100 |
Ø13.0/6.5 | 13.6±0.4 | 0.23±0.10 | ≤6.5 | 0.46±0.10 | 100 |
Ø14.0/7.0 | 14.6±0.4 | 0.23±0.10 | ≤7.0 | 0.46±0.10 | 100 |
Ø15.0/7.5 | 15.6±0.5 | 0.23±0.10 | ≤7.5 | 0.46±0.10 | 100 |
Ø16.0/8.0 | 16.6±0.5 | 0.25±0.10 | ≤8.0 | 0.50±0.10 | 100 |
Ø18.0/9.0 | 18.6±0.5 | 0.25±0.10 | ≤9.0 | 0.55±0.10 | 100 |
Ø20.0/10.0 | 20.6±0.6 | 0.25±0.10 | ≤10.0 | 0.55±0.10 | 100 |
Ø22.0/11.0 | 22.6±0.6 | 0.28±0.10 | ≤11.0 | 0.60±0.10 | 100 |
Ø25.0/12.0 | 25.6±0.6 | 0.30±0.10 | ≤12.0 | 0.65±0.10 | 25 |
Ø28.0/14.0 | 28.8±0.8 | 0.30±0.10 | ≤14.0 | 0.65±0.10 | 25 |
Ø30.0/15.0 | 30.8±0.8 | 0.33±0.10 | ≤15.0 | 0.70±0.10 | 25 |
Ø35.0/17.5 | 36.0±1.0 | 0.35±0.10 | ≤17.5 | 0.75±0.10 | 25 |
Ø40.0/20.0 | 41.0±1.0 | 0.35±0.10 | ≤20.0 | 0.75±0.10 | 25 |
Ø50.0/25.0 | 51.0±1.0 | 0.40±0.10 | ≤25.0 | 0.80±0.10 | 25 |
Ø60.0/30.0 | 61.0±1.0 | 0.40±0.10 | ≤30.0 | 0.80±0.10 | 25 |
Ø70.0/35.0 | 71.0±1.0 | 0.40±0.10 | ≤35.0 | 0.80±0.10 | 25 |
Ø80.0/40.0 | 81.0±2.0 | 0.45±0.10 | ≤40.0 | 0.90±0.10 | 25 |
Ø90.0/45.0 | 91.0±2.0 | 0.45±0.10 | ≤45.0 | 0.90±0.10 | 25 |
Ø100.0/50.0 | 102.0±2.0 | 0.50±0.10 | ≤50.0 | 1.0±0.20 | 25 |
Ø120.0/60.0 | 122.0±2.0 | 0.50±0.10 | ≤60.0 | 1.0±0.20 | 25 |
Ø150.0/75.0 | 152.0±2.0 | 0.50±0.10 | ≤75.0 | 1.0±0.20 | 25 |
4. Ordering Information
Different sizes Heat shrink insulation sleeving, heat shrink tubing for wires and electrical wires
Packing
1. By diffrent cartons and plastic pallents.
2. Anonymous packing is available.
3. OEM packing is available.
4. Do as customer's requirements.
Delivery
1. Our factory is nearby Shanghai.
2. Other seaport is acceptable.
3. Do as customer's requirements.
Contact Person: Jimmy